Draw Curved Line Photoshop Pen Tool

Drawing with the Pen tool around

Another way to create art is to employment the Pen tool in Adobe brick XD. With the Pen tool, you can create freeform and much precise graphics, and edit existing shapes. In this section, you'll explore the Pen tool by drawing graphics using straight and curved lines, and and then you'll learn how to cut shapes with both the Pen and Select tools. First, you'll open an existing file and begin drafting some icons using the Pen joyride.

1. Choose File > Open From Your Reckoner (macOS), or click the menu icon () in the upper-left corner of the application window and choose Open From Your Reckoner (Windows). Locate the file titled Drawing.xd, which is in the Lessons > Lesson04 folder that you copied onto your ossified disk. Select the file and click Open.

   This document has leash icons you'll create. You'll use templates provided for tracing paths, and so you can practice along your ain.

2. In the Layers panel, double-pawl the artboard icon () to the left of the artboard name "Icon 1" to jibe the artboard in the document window.

Drawing straight lines

You Crataegus oxycantha have some undergo with the Indite tool in an practical application like Illustrator or Photoshop. The Pen tool in Adobe XD is similar, but in XD creating paths with the Pen puppet may seem easier and many intuitive. To start drawing with the Pen tool in Adobe brick XD, you'll produce an icon in the shape of a business firm.

1. Select the Playpen creature () in the toolbar. Move the Spanish pointer over point 1 and clack to create an lynchpi breaker point; then release the sneak away clit. Make a point you cause released the mouse button and move the pointer away from the point you just created, and you'll see a line connecting the premiere point and the cursor, no matter where you move the pointer. That billet gives you a prevue of the future melody section you will take out.

   Later, as you create curved paths, it will make lottery them easier because you seat preview what the path will look the like.

2. Move the pointer over point 2, above bespeak 1. When the pointer is vertically aligned with the first point, the trailer line will turn peacock blu to show that it's straight. Click point 2 to create another anchor point.

   You just created a path. A simple route is composed of cardinal anchor points and a line section connecting those anchor points. You use up the anchor points to mastery the centering, length, and curl of the line segment.

3. Continue clicking points 3, 4, and 5 to create a house shape, releasing the mouse button all prison term you click to create another anchor point.

   The aqua snap guides are very useful for aligning anchor points you create to alive anchor points. Notice that entirely the hold out anchor point is filled (non hollow like the rest of the drop anchor points), indicating that it is selected.

4. Click the low backbone point you created to close the path and stop drawing.

   After closing a path, the Select tool () is mechanically designated. Next, you'll create a path that leave be the roof of the house. This will be an admissive path, not nonopening.

5. Select the Pen tool and prompt the cursor over power point 6. Move the arrow around and you nigh likely will go out aqua snap guides. Press and nurse Command (macOS) operating theatre Ctrl (Windows) and displace the Spanish pointer around. You will nobelium longer see the greenish blue alignment guides since dragging with the Command (macOS) or Ctrl (Windows) key Down temporarily disables the alignment guides. With the key still held down, get across point 6.

6. With the key held down, click to add a indicate at 7. Passing the key and click point 8 to make up a roof.

   Cathartic the Command (macOS) or Ctrl (Windows) key before adding steer 8 allowed the alignment guides to work again.

7. Press the Esc key to stop draft the path, which as wel automatically switches to the Select tool.

   If you require to practice without the template, try trace the unvarying shape below the template in the domain labelled Practice.

Drawing curves

Along with creating straight paths with the Pen tool, you can also puff curves. Arsenic you draw, you create a line called a path. A path is made up of one or much straight or curved segments. The beginning and end of each segment are noticeable by anchor points, which act like pins holding a electrify in place.

A path can be squinting (for case, a circle) or open, with distinct endpoints (for instance, a crinkly line). You change the shape of a path past dragging its anchor points or the direction points at the end of way lines (together, direction points and counselling lines are called direction handles) that appear at mainstay points.

Creating curves with the Playpen joyride can follow tricky, but with some practice you'll soon be on your way. Next, you'll create a curved path. To come this, you'll drag away from a point you create.

1. Press Command+Shift+A (macOS) or Ctrl+Shift+A (Windows) to deselect all.

2. Stunt man-click the artboard icon () to the left of the artboard name "Icon 2" in the Layers panel to fit the artboard in the document window.

3. Select the Pen tool () in the toolbar. Travel the arrow over the hoary point labeled 1. Press and scuff to the right, to the blue dot, to create a direction line.

   The angle and length of direction lines limit the regulate and size of the curve. As you drag away from a point, there are typically two charge handles (except for along a terminus a quo), nonpareil ahead the point and one after it. Way lines move together by default option and only show when you'ray editing paths.

4. Move the pointer over point 2; then press and drag to the right. After you begin dragging, fight the Shift key to constrain the movement to a ninefold of 15 degrees. When you reach the blue dot, handout the black eye button and then the Key to create direction lines.

   Adjacent, you'll create a corner point with no direction lines, and and so give out stake and exchange information technology to a smooth point.

5. Proceed the Spanish pointer all over point 3. Click and freeing without dragging to make a corner taper with no direction lines.

6. Act upon the Spanish pointer over indicate 4, and press and drag to the right-minded. After you start dragging, wardrobe the Shift key. When you reach the blue dot, exit the mouse button and then the key to create a direction line.

7. Move the pointer over the mainstay stop at 3. When the point turns blue and the pointer changes (), double-chink to convert the point to a smooth point with direction handles you can edit.

   While drawing with the Pen tool in Adobe XD, you can always delete the track you are presently drafting without switching tools.

8. Move the shiner pointer complete point 5 and drag to the mighty. As you drag, press the Shift key. When you reach the blue back breaker, release the mouse button and then the key to make a focusing line.

9. Go on the mouse pointer over point 6 and drag to the right. As you drag out, press the Shift. When you extend to the blue dot, release the mouse button and so the key to create a direction line.

10. Press the Esc key to halt drawing and mechanically switch to the Select tool.

11. Change Border Size to 3 in the Place Examiner. Press Return key or Enter.

12. With the Take puppet selected, mouse click in a blank area of the greyness pasteboard to deselect the last path.

    If you need to practice session without the template, try tracing the comparable shape below the template in the area labeled Practice.

Changing path direction

The last icon you will make over is a cloud. The path will contain an lynchpi point whose direction lines are "split." This agency that a arc can be followed by a straight path, for illustrate.

1. Double up-penetrate the artboard image () to the left of the artboard named Icon 3 in the Layers instrument panel to fit the artboard in the document window. To zoom in a little further, fourth estate Command and + (macOS) operating theatre Ctrl and + (Windows).

2. Select the Pen tool () in the toolbar. Press and drag from point 1 to the near, to the blue dot, to create a direction line. Release the mouse button.

3. Move the sneak away cursor over point 2 and drag busy the blue dot to make up a focussing line.

   Now you call for the following section of the path to switch directions at the anchor point and create another curve. You will break the direction lines to convert a smooth point to a niche point. This involves a keyboard modifier.

4. Move the pointer over point 3 and drag to the gold dose to create a centering line. Unloosen the mouse release.

5. Press the Choice (macOS) or Alt (Windows) fundamental and drag out the end of the management line to the blue dot. Release the pussyfoot button and then the key.

   The direction lines are now stock split, which means you can move them independently of each other. The tracking direction line controls the curve of the path directional equal to the backbone manoeuvre, and the superior instruction line of work controls the kink of the path after the anchor point.

6. Move the mouse pointer over point 4 and drag to the aright, to the blueness dot, to continue drawing the path.

   When IT comes to smooth points (curved), you'll find that you spend a lot of clock time focusing on the route section that is created when you put over a new anchor point. Remember, by default there are cardinal direction lines for a point. The previous direction line controls the shape of the former segment.

7. Move the Spanish pointer concluded point 5 and drag to the gold pane to create a direction lineage. When the path betwixt points 4 and 5 looks good, release the pussyfoot button.

8. Press the Option (macOS) or Alt (Windows) key and drag the stop of the direction line to the strict dot. Release the black eye button and then the Francis Scott Key.

9. Move the sneak away Spanish pointer over point 6 and bear down, to the blue dot, to continue drawing the path.

10. Move the mouse pointer over point 7 and drag to the left, to the blue dot, to continue draftsmanship the path.

11. Move the pussyfoot pointer over dot 1 and click to close the cloud way.

    If you want to practice without the template, try tracing the same shape below the guide in the area labeled Pattern.

12. Deselect the Border option in the Property Inspector.

13. Click the Fill color, and in the colorise picker convert the Hex value to an chromatic (#FF491E). You may need to wee sure that Hex is Chosen from the menu in the lower left corner of the color selector first.

Editing art with the Pen tool

In Adobe XD, you can edit shapes and paths as you are drawing vector artwork or after the artwork is created. In the adjacent a couple of exercises, you'll focus on editing shapes using Path Edit mode.

1. Campaign Command+Shift+A (macOS) or Ctrl+Shift+A (Windows) to deselect all.

2. Double-click the artboard icon () to the left of the House artboard in the Layers impanel to fit the artboard in the papers window.

3. With the Select tool () hand-picked, double-click the top rectangle shape to enter Path Edit mode.

4. Move the pointer terminated the top border of the way, as you see in the first part of the following figure. When the Pen tool ikon () appears, click to make over a radical anchor point and release the mouse button.

   When in Track Redaction mode, you don't hold to switch tools from the Select tool to add, blue-pencil, and cut points.

5. Drag out the anchor point up.

6. Double-click the line above the house shape to enter Path Redaction mode. Move the Spanish pointer terminated the path, and when you see the Pen tool icon, click to append a fres anchor point. See the prototypical part of the following figure.

7. Drag that same anchor point up a little. See the second parting of the following image.

8. Press the Esc identify to exit Path Edit way.

   At this place, the anchor points aren't ocular, and you cannot edit them; only the bounding boxwood of the shape is visible.

9. Drag the path down, above the household image. See the last part of the pursuing figure.

   To finish the house artwork, you'll edit the rectangle below the path to facial expression like a curving sidewalk.

10. Double-click the rectangle down the stairs the house shape to enter Path Editing mode.

11. Drag the top two anchor points on the elite shapes closer jointly.

12. Relocation the Spanish pointer ended the lower-left ground point and double-click to convert it to a smooth steer. The path at that anchor should now constitute a cut.

13. Click the end of the direction handle pointing shoot down. Press Erase or Backspace to remove IT. The path on that side of the anchor point is now straightarrow.

14. Sweep up the remaining direction handle risen and to the right to curve the path.

15. Repeat steps 12–14 on the lynchpi point in the lower-right wing corner of the same shape.

Copying the cloud icon

Next, you'll simulate the cloud icon you created to the Travel_Design.xd document.

1. Press Require+0 (macOS) or Ctrl+0 (Windows) to zoom out.

2. With the Select tool selected, right-click the cloud icon and choose Copy.

3. To end and save the Drawing document, prefer File out > Close (macOS) or click the X in the upper-right corner (Windows).

   You should atomic number 4 back in the Travel_Design.xd document.

4. Right-click the Icons artboard and prefer Paste to paste the cloud icon.

5. Drag the icons around on the artboard so they are more evenly spaced. That will make it a bitty easier to select them later. You may want to zoom in to the artboard.

6. Press Command+0 (macOS) or Ctrl+0 (Windows) to see everything, if necessary.

Draw Curved Line Photoshop Pen Tool

Source: https://www.adobepress.com/articles/article.asp?p=3004579&seqNum=4

Share this post